MAGTROL - Motor Testing & Sensors

Sveitsi

Factory icon Valmistaja/ Tuottaja

MAGTROL
Web icon
High Speed Motor and Handpiece Testing 400000rpm and higher

High Speed Motor and Handpiece Testing 400000rpm and higher

Viimeisin saavutus ・ 6. tammik. 2022 lue lisää Open In New icon

MSD Mega Speed Dynamometer is the latest Magtrol innovation in the very high-speed motor and system testing. Challenged by its numerous customers in the Dental and Surgical field, Magtrol is pushing the limit to a level which was never reached. The braking effect is based on Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a 20 mN·m Reaction Torque Sensor having a resolution of 0.01 mN·m. Due to the thermal effect on the disc, the Mega Speed Dynamometer is not suit­able for endurance testing, but can be used to generate a fast curve or perform point to point testing. An infrared sensor monitors the temperature of the disc and stops the test in case of overheating. The disc can be designed and sized according to the motor parameters. The system is contactless therefore alignment is not critical and the inertia is very low (no friction, no residual or drag torque).... more info: www.magtrol.com

Hochgeschwindigkeits-Motor- und Handstückprüfung 400000min-1

Hochgeschwindigkeits-Motor- und Handstückprüfung 400000min-1

Viimeisin saavutus ・ 6. tammik. 2022 lue lisää Open In New icon

Das MSD Mega Speed Dynamometer ist die neuste Innovation von Magtrol im Bereich der Hochgeschwindigkeits-Motor- und Systemtests. Herausgefordert durch seine zahlreichen Kunden aus dem Dental- und Chirurgiebereich, geht Magtrol an Grenzen, die noch nie erreicht wurden. Der Bremseffekt basiert auf Wirbelstrom, der auf einer Aluminiumscheibe induziert wird, die direkt auf der Welle des Prüflings montiert ist. Das Drehmoment wird reibungsfrei mit einem 20 mN·m Reaktionsmomentsensor mit einer Auflösung von 0.01 mN·m gemessen. Aufgrund des thermischen Effekts auf die Scheibe ist der Mega Speed Dynamometer nicht für Dauertests geeignet, kann aber zur Erstellung einer schnellen Kurve oder zur Durchführung von Punkt-zu-Punkt-Tests verwendet werden. Ein Infrarotsensor überwacht die Temperatur der Scheibe und unterbricht den Test im Falle einer Überhitzung. Die Scheibe kann entsprechend den Motorparametern ausgelegt und dimensioniert werden... mehr Informationen: www.magtrol.com

Test de moteurs et de pièces à main à 400 000 min-1 et plus!

Test de moteurs et de pièces à main à 400 000 min-1 et plus!

Viimeisin saavutus ・ 6. tammik. 2022 lue lisää Open In New icon

Le MSD Mega Speed Dynamometer est la dernière innovation de Magtrol dans le domaine des tests de moteurs et de systèmes à très haute vitesse. Défié par ses nombreux clients dans le domaine dentaire et chirurgical, Magtrol repousse la limite à un niveau jamais atteint. L’effet de freinage est basé sur les courants de Foucault induits sur un disque en aluminium monté directement sur l’arbre du DUT (Device Under Test). Le couple est mesuré sans friction par un capteur de couple à réaction de 20 mN·m ayant une résolution de 0.01 mN·m. En raison de l’effet thermique sur le disque, le Mega Speed Dynamometer ne convient pas aux tests d’endurance, mais peut être utilisé pour générer une courbe rapide ou effectuer des tests point par point. Un capteur infrarouge surveille la température du disque et arrête le test en cas de surchauffe. Le disque peut être conçu et dimensionné en fonction des paramètres du moteur... plus d'info: www.magtrol.com

Motor Test System for Dental and Surgical Instrument

Motor Test System for Dental and Surgical Instrument

Viimeisin saavutus ・ 29. lokak. 2020 lue lisää Open In New icon

Customized Motor Test System for Dental and Surgical Instrument Testing IN PARTNERSHIP WITH LEADING DENTAL AND MEDICAL MANUFACTURERS, MAGTROL DESIGNS SPECIFIC MOTOR TEST BENCHES TO PROVIDE EFFICIENT SOLUTIONS TO EASILY AND QUICKLY TEST DENTAL AND SURGICAL INSTRUMENTS. Hospitals and surgery centers make their biggest investments in surgical instruments. Developing and testing these instruments to the highest standards are the responsibility of innovative companies dedicated to this field of activities ensuring that, at the end of the chain, the patients receive the best and safest possible care. Over the years Magtrol has developed strong relations with the main players in the powered surgical tools markets by providing sensors and test systems allowing them to improve and qualified their products such as surgical drills, reamers, saws, screwdrivers and handpiece instruments. Recently Magtrol provided a turnkey Customized Motor Test System (CMTS) ... read more: www.magtrol.com

Banc d’essai pour les domaine dentaire et chirurgical

Banc d’essai pour les domaine dentaire et chirurgical

Viimeisin saavutus ・ 29. lokak. 2020 lue lisää Open In New icon

Banc d’essai pour les tests et contrôles des instruments chirurgicaux EN PARTENARIAT AVEC LES PRINCIPAUX FABRICANTS DE PRODUITS POUR LES DOMAINES DENTAIRES ET MÉDICAUX, MAGTROL CONÇOIT DES BANCS D’ESSAI MOTEUR SPÉCIFIQUES. NOUS FOURNISSONS DES SOLUTIONS EFFICACES POUR TESTER FACILEMENT ET RAPIDEMENT LES INSTRUMENTS DENTAIRES ET CHIRURGICAUX. Les hôpitaux et les centres de chirurgie investissent beaucoup dans les instruments chirurgicaux. La mise au point et les tests de ces instruments selon les normes les plus élevées sont la responsabilité d’entreprises innovantes qui se consacrent à ce domaine d’activités et qui veillent à ce que, en bout de chaîne, les patients reçoivent les soins les meilleurs et les plus sûrs. Au fil des ans, Magtrol a développé des relations solides avec les principaux acteurs des marchés des outils chirurgicaux motorisés en leur fournissant des capteurs et des capteurs et des systèmes de test leur permettant d’améliorer ... plus d'info: www.magtrol.com

PSD Indicateur portable pour capteur à jauges de contrainte

PSD Indicateur portable pour capteur à jauges de contrainte

Tuotteen lanseeraus ・ 2. elok. 2021 lue lisää Open In New icon

Le nouvel indicateur portable PSD (Portable Sensor Display) de Magtrol est une unité autonome alimentée par 3 piles AA ou par USB. Il est très compact (~160 x 80 x 50 mm) et peut être facilement transporté et utilisé sur un chantier de génie civil, dans un bureau ou un laboratoire de recherche et développement ou dans un atelier de production. Son boîtier est ergonomique, étanche (IP54) et protégé par un amortisseur en caoutchouc. Il convient à tout type de capteur à jauges de contrainte, qu’il s’agisse d’une cellule de charge, d’un axe dynamométrique ou d’un capteur de couple de réaction. L’amplificateur interne peut traiter une gamme de signaux de ±0.3 … 5 mV/V. Le nouvel afficheur portable PSD est très flexible et répond aux spécifications les plus élevées en termes de précision (0,01%) et de fréquence de mesure (1600/s). Il permet de stocker jusqu’à 16 plages de mesure programmables qui peuvent être configurées soit directement sur l’unité, soit via... plus d'info: www.magtrol.

New: PSD – Portable Sensor Display

New: PSD – Portable Sensor Display

Tuotteen lanseeraus ・ 2. elok. 2021 lue lisää Open In New icon

Magtrol’s New PSD Portable Sensor Display is a stand-alone unit powered by either 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory, as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable for any type of strain gauge transducer including a load cell, load pin or reaction torque sensor. The internal amplifier can process a signal range of ±0.3 … 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specifications in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows the storage of up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected simultaneously and ... read more: www.magtrol.com

Neu: PSD – Tragbare Messverstärker und Anzeige

Neu: PSD – Tragbare Messverstärker und Anzeige

Tuotteen lanseeraus ・ 2. elok. 2021 lue lisää Open In New icon

Die neue PSD-Handanzeige von Magtrol ist ein eigenständiges Gerät, das mit 3 AA-Batterien oder über USB betrieben wird. Es ist sehr kompakt (~160 x 80 x 50 mm) und kann leicht transportiert und auf einer Baustelle, in einem Forschungs- und Entwicklungsbüro oder Labor sowie in einer Produktionshalle eingesetzt werden. Sein Gehäuse ist ergonomisch, wasserdicht (IP54) und durch einen Gummistoßdämpfer geschützt. Er eignet sich für jede Art von Dehnungsmessstreifen-Aufnehmern, sei es eine Wägezelle, ein Lastmessbolzen oder ein Reaktionsdrehmoment-Sensor. Der interne Verstärker kann einen Signalbereich von ±0.3 … 5 mV/V verarbeiten. Das neue PSD Portable Display ist sehr flexibel und erfüllt die höchste Spezifikation in Bezug auf Genauigkeit (0,01%) und Messfrequenz (1600/s). Es ermöglicht die Speicherung von bis zu 16 programmierbaren Messbereichen, die entweder direkt am Gerät oder über die USB-Schnittstelle und die dazugehörige Software (im Lieferumfang ... mehr info: www.magtrol.com

Test Bench for the Analysis of the Performance of Cyclists

Test Bench for the Analysis of the Performance of Cyclists

Viimeisin saavutus ・ 29. lokak. 2020 lue lisää Open In New icon

THE FAST_SPOR’IN (SPORT & WELLNESS) PROGRAM OF THE UNIVERSITY OF AIX-MARSEILLE (FRANCE), SUPPORTED BY THE CARNOT STAR INSTITUTE OF MARSEILLE, HAS COMMISSIONED MAGTROL TO DEVELOP A CUSTOM TEST BENCH FOR ANALYZING THE BIOMECHANICAL PERFORMANCE OF CYCLING ATHLETES. After studying the project, Magtrol’s CMTS (Custom Motor Test System) department proposed a simple solution that permits the use of a standard bike. The only handling required is to replace the rear wheel with a drive system that allows the bike to be coupled to a test deck that includes Magtrol’s standardized components. Mainly built around a TPB Series Powder Brake and a TM Series Torque Sensor, the system allows to regulate the effort provided by the rider by producing a load of up to 400 N·m. The mechanical design was intended to be very rigid in order to ensure the greatest possible stability for the system and the user. This test bench is currently used on the TechnoSport platform ... more info: www.magtrol.com

Prüfstand für die Leistungsanalyse von Radfahrern

Prüfstand für die Leistungsanalyse von Radfahrern

Viimeisin saavutus ・ 29. lokak. 2020 lue lisää Open In New icon

DAS PROGRAMM FAST_SPOR‘IN (SPORT & WELLNESS) DER UNIVERSITÄT AIX-MARSEILLE (FRANKREICH), UNTERSTÜTZT DURCH DAS CARNOT STAR INSTITUT VON MARSEILLE, HAT MAGTROL MIT DER ENTWICKLUNG EINES KUNDENSPEZIFISCHEN PRÜFSTANDES ZUR ANALYSE DER BIOMECHANISCHEN LEISTUNG VON RADSPORTLERN BEAUFTRAGT. Nach dem Studium des Projekts schlug die Abteilung CMTS (Custom Motor Test System) von Magtrol eine einfache Lösung vor, die den Einsatz eines Standard-Bikes erlaubt. Die einzige erforderliche Handhabung besteht darin, das Hinterrad durch ein Antriebssystem zu ersetzen, das es erlaubt, das Rad mit einem Prüfstand zu koppeln, der die standardisierten Komponenten von Magtrol enthält. Das System das hauptsächlich aus einer Pulverbremse TPB Reihe und einem Drehmomentsensor TM Reihe besteht erlaubt es, die vom Fahrer aufgebrachte Kraft durch die Erzeugung einer Last von bis zu 400 N·m zu regulieren. Die mechanische Konstruktion sollte sehr steif sein, um eine größtmögliche ... mehr info: www.magtrol.com

Domain icon Valmistaja/ Tuottaja

MAGTROL

Route de Montena 77

1728 Rossens - Sveitsi

ALV-n:o
Yhteyshenkilö