Tulokset hakusanalle

Liitokset - Saksa

102 Yritykset

0 Tuotteet

KENDRION KUHNKE AUTOMATION GMBH

Saksa

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

Verkkosivusto
WESA-ARMATUREN GMBH

Saksa

WESA is a prestigious company that offers a comprehensive range of ball valves, heating valve assemblies, pipeline valve assemblies and industrial valve assemblies to meet the wishes and requirements of specialised wholesale supply for the sanitation, heating and technical sectors. Our products include: Valve assemblies, pipeline valve assemblies, flange ball valves, ball valves, shut-off valves, stainless steel valves, strainers (valve assemblies), stainless steel ball valves, butterfly valves and non-return valves

Verkkosivusto
JACOB GMBH

Saksa

Connected by Ambition. This is our motto at Jacob. We apply our specialist knowledge as a problem solver in all matters relating to cable entry products. We have been in the market since 1922. With our broad range of products we can offer a cable entry solution for almost every application. Plus our engineering team is ready to develop special solutions together with and for our customers. We are looking forward to taking on your challenges.

Verkkosivusto
BETEK SICHERHEITSTECHNIK GMBH

Saksa

BETEK SICHERHEITSTECHNIK GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Tilkitsemisaineet, vedenpitävät. Se on aktiivinen myös seuraavilla toimialoilla Yritysturvallisuus, turvajärjestelmät, vuoraustäytteet, liitokset. Sen sijainti on Groß-Zimmern, Saksa.
SCANSONIC PGS GMBH

Saksa

SCANSONIC PGS GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Tiivisteet ja tiivistemateriaalit. Se on aktiivinen myös seuraavilla toimialoilla Kaasuturbiinit, höyryturbiinit, Kaasuturbiinit, liitokset, teollisuustiivisteet. Sen sijainti on Berlin, Saksa.

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

EDIERK GMBH

Saksa

EDIERK GMBH, on Vähittäiskauppias, joka toimii toimialalla Verkkomarkkinointi. Se on aktiivinen myös seuraavilla toimialoilla liitokset, elementtikeittiöt. Sen sijainti on Herford, Saksa.
GUMMI-WELZ GMBH & CO. KG

Saksa

GUMMI-WELZ GMBH & CO. KG, on Valmistaja/ Tuottaja, joka toimii toimialalla Kumituotteet. Se on aktiivinen myös seuraavilla toimialoilla Kumitiivisteet, Tiivisteet, Tiivisteet ja tiivistemateriaalit, liitokset, Kumitiivisteet, Tiivisteet, Tiivisteet ja tiivistemateriaalit. Sen sijainti on Neu-Ulm, Saksa.
FRANZ SCHUCK VERWALTUNGS-GMBH

Saksa

FRANZ SCHUCK VERWALTUNGS-GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla Putkityöt, kodin, Putkityöt, kodin, mekaaniset voimansiirrot, liitokset, pneumatiikka- ja hydrauliikkamoottorit. Sen sijainti on Steinheim, Saksa.
A + R ARMATUREN GMBH

Saksa

A + R ARMATUREN GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla Hanat ja venttiilit raakaöljylle ja öljyteollisuudelle, Hanat ja venttiilit raakaöljylle ja öljyteollisuudelle, palloventtiilit, liitokset. Sen sijainti on Bad Salzuflen, Saksa.
ASKIA GMBH

Saksa

ASKIA GMBH, on Palveluntarjoaja, joka toimii toimialalla Venttiilit saniteettiliittimiin. Se on aktiivinen myös seuraavilla toimialoilla Repäisylaikat, korkeapaineventtiilit, liitokset, Repäisylaikat. Sen sijainti on Willich, Saksa.

BOPP & REUTHER SICHERHEITS- UND REGELARMATUREN GMBH

Saksa

BOPP & REUTHER SICHERHEITS- UND REGELARMATUREN GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla liitokset, Venttiilit, Sulkuventtiilit, deprimogeenijärjestelmät. Sen sijainti on Mannheim, Saksa.
RK KUTTING GMBH

Saksa

RK KUTTING GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kumituotteet. Se on aktiivinen myös seuraavilla toimialoilla Putket ja letkut, kumia ja muovia, Putket ja letkut, kumia ja muovia, muoviputket vesijohtoja varten, liitokset, termoplastiset putket. Sen sijainti on Talheim, Saksa.

AZ-ARMATUREN GMBH

Saksa

AZ-ARMATUREN GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla palloventtiilit, takaiskuventtiilit, näytteenotto, liitokset. Sen sijainti on Mönchweiler, Saksa.
MAASS GLOBAL GROUP W. MAASSGMBH

Saksa

MAASS GLOBAL GROUP W. MAASSGMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Varoventtiilit, putkityö. Se on aktiivinen myös seuraavilla toimialoilla Putkityöt, teollisuus, Putkityöt, teollisuus, liitokset, vesitiiviit liitokset. Sen sijainti on Essen, Saksa.
ARTA ARMATUREN- UND TANKGERÄTEBAU GMBH & CO KG

Saksa

ARTA ARMATUREN- UND TANKGERÄTEBAU GMBH & CO KG, on Valmistaja/ Tuottaja, joka toimii toimialalla Putkityöt, teollisuus. Se on aktiivinen myös seuraavilla toimialoilla liitokset, Putkikierreliittimet, letkujen symmetriset liitoskappaleet, näytteenotto. Sen sijainti on Diez, Saksa.
HTTP://WWW.MASTERTEC.EU

Saksa

HTTP://WWW.MASTERTEC.EU, on Valmistaja/ Tuottaja, joka toimii toimialalla Tiivisteet. Se on aktiivinen myös seuraavilla toimialoilla liitokset. Sen sijainti on Oberhaid, Saksa.
HALA DICHTUNGEN UND ISOLIERTEILE GMBH & CO. KG

Saksa

In 1919, Hans Langguth founded a business as a supplier of flat gaskets. Today, smart growth has established this business as one of the leading providers of sealing and insulation technology, as well as innovative system solutions for thermal management. And as for tomorrow? Well, we still have plenty to come. Our approach is an integrated solution that combines thermally conductive materials, THERMACORE thermal management solutions, insulating films and sealing materials, fixture management, consultation and engineering, product design, materials processing and delivery – for a project that is process-oriented from beginning to end. We live and work according to a simple concept: From the idea for a project and the start of production, through to series production and product shipping, definition and control are always essential. At the same time, we audit our partners just as regularly as we continually and proactively improve our own certifications.

Verkkosivusto
BILLI DICHTUNGSTECHNIK GMBH

Saksa

Our business specialises in manufacturing and trading in the following seals: Axial face seals, compression gland packing, stamped flat seals, PTFE (Teflon®), graphite seals, as well as spiral seals, and we additionally stock flat gasket tape, floating ring seals, compression ring packing and many other items. You will benefit from our large warehouse. Virtually all our standard seals are in stock in all combinations of materials and dimensions (more than 80, 000 components).

Verkkosivusto
ULMAN DICHTUNGSTECHNIK GMBH

Saksa

We are a complete service provider in sealing technology and have diversified into many fields such as mechanical engineering, stationary and mobile hydraulic systems, drive technology and electrical engineering, plant manufacture, the chemical industry, process engineering and the automotive sector. As a globally oriented company, we represent a partner the success of which comes down to its closeness to the customers and the market. Responsibility for the strength of the company's growth falls to the 103 employees in our group for the customer service they provide and their willingness to innovate. In the year 2016 alone, we were able to look back over 361 million sold articles. Our orientation towards long-term goals and the continuous growth of the company since it was founded spur us on and confirm the functionality of our strategic organisation and quality of or products. Our committed employees make sure that you receive quality, service, innovation and the best possible solution for every application at all three sites.

Verkkosivusto
OHRMANN GMBH

Saksa

OHRMANN MONTAGETECHNIK combines seal assembly and automation. OHRMANN MONTAGETECHNIK specialises in equipment, stations and machines, as well as fully automated solutions, for feeding and installing seals. Since the company was founded in 1986, OHRMANN MONTAGETECHNIK has been helping customers to feed and install seals with speed, reliability, consistency and automation. The solutions are employed not only for O-rings, but also for lip seals and other seal geometries, including even complex moulded seals. Our portfolio of solutions incorporates: • Standardised assembly equipment, semi-automated and fully automated systems for internal assembly, external assembly or front-end assembly of seals • Integration modules and stations: A modular system for feeding and installing seals for integration in fully automated systems • Complete automation solutions, available as rotary table systems, line transfer systems or robot cells

Verkkosivusto

CARL CROONEN GMBH MARINE DIESEL TECHNICS

Saksa

With almost 100 years of experience. Now managed in its fourth generation, our company has specialised in the global distribution of high quality spare parts for diesel and gas engines. We provide technological progress from the heart of development. Benefit from our direct links with industry, combined with our high flexibility in all areas. Our products.: Spare parts for diesel and gas engines, attachments and spare parts, components for control systems, control and monitoring systems, drive technology and seal manufacturing.

Verkkosivusto
E.S. ELECTRONIC SERVICE GMBH

Saksa

E.S. Electronic Service GmbH produces and sells customer-facing solutions around the world. We concentrate our resources on electronic components, materials designed for EMC shielding and thermal conduction, and interference filters and absorbers. Tailor-made products to individual specifications for customer-specific applications, produced using state-of-the-art technology, are at the centre of what we do. In order to meet the requirements of our clients for high-quality products, we are constantly breaking new ground and incorporate the latest findings and newest techniques into our production processes. Twenty-five years of experience in these areas, qualified consultants and practical customer support, professional and well-known partners and our focus on innovation and progress are the building blocks of our success. We are certified and meet the quality standards specified in DIN EN ISO 9001: 2008 and DIN EN ISO 14001: 2

Verkkosivusto
BEKU DICHTUNGSELEMENTE GMBH

Saksa

BEKU Dichtungselemente GmbH was founded in 1989 in the Taunus area of Hesse, Germany, and has since specialised in the CNC manufacturing of seals and sealing elements, predominantly in the area of hydraulics. However, we also supply seals for pneumatics and general mechanical engineering applications. We are in a position to manufacture rod and piston seals, wipers, support and guide rings, flat gaskets, rotor bearings and O-rings in all common plastic and rubber materials and deliver these as part of an overnight service. Unique product? No problem! Our individual manufacturing procedure gives us a high level of flexibility and the shortest delivery times. All seals and sealing elements manufactured by us are made from high-quality materials such as polyurethane, NBR, EPDM, Viton, silicone, POM, PA, UMMWPE, PTFE, and Ekonol and conform to the highest standards in quality.

Verkkosivusto
EPA GMBH

Saksa

As a specialist in the field of electronic drive technology, we see ourselves not only as a component supplier, but also as a systems provider. Starting with engineering, through consultation and support, right up to commissioning, we provide all services, including installations on turnkey contract. Our core services are: Planning your applications, designing electrical drive components, (frequency inverter, engine, gearbox, transmitter, filter, brake resistors, etc.), commissioning and parametrisation of frequency inverters, PLC programming and automation, control cabinet construction (in cooperation with our affiliated company EPS), installation of electrical components, developing and manufacturing customer-specific EMC and line filters, EMC measurements and EMC consultation, leakage current optimisation (FI protection switch for false tripping), line analyses (harmonics, line fluctuations, etc.), suppression of radio interference in plants and equipment

Verkkosivusto
REINLE GUMMI & KUNSTSTOFF GMBH

Saksa

Ideas in good hands. Since 2000, Reinle Technik GmbH has been certified in accordance with the DIN EN ISO 9001 quality standard. We have been providing our partners from the industrial engineering, automotive and electrical industry with tailored solutions for a number of years. With state-of-the-art production techniques, flexibility, speed and expertise, as well as the commitment of all employees, ideas and requirements become precise technical parts made of rubber and plastic. For you, we manufacture and process: Stamped parts – profiles – formed parts – acrylic finished parts – plastics – elastomers – cellular materials – acrylic glass. We supply you with technical building products: Installation foams for assembly, thermal insulation and sound insulation measures, silicones for special applications, backing tapes, cork stacking discs.

Verkkosivusto
CHETRA DICHTUNGSTECHNIK AG

Saksa

In line with top quality standards. Welcome to CHETRA! We are an international specialist in providing high quality and high capacity mechanical seals. Our products and solutions meet the most demanding technical requirements. CHETRA offers wide-ranging expertise and experience covering the main branches of industry, while guaranteeing "Made in Germany" quality standards for every product. In line with individual customer requirements. Whether it is mechanical seals in accordance with the latest standards for complex applications or packings, gaskets, sealing tapes, pure graphite seals, liquid seals, sealing compounds or related services – in the CHETRA portfolio, you will find the perfect solution for your requirements. And if our basic product range is not sufficient, our experts are available to develop a tailor-made solution for you. We will be happy to advise and accompany you from the initial idea to the point where your solution is put into operation and to our after-sales service.

Verkkosivusto
SPECK-TRIPLEX-PUMPEN GMBH & CO KG

Saksa

The range of products from Speck-Triplex-Pumpen GmbH & Co. KG includes a large number of industrial pumps such as plunger pumps, piston pumps, dosing pumps, fluid pumps, process pumps and high-pressure pumps. Speck-Triplex pumps feature first-class workmanship. Our high-pressure plunger pumps are used in high-pressure cleaning, in machinery and plant engineering and in a number of other areas and sectors. By consistently using new materials and due to the continuous increase in flow quantities as well as pressures, pumps from Speck-Triplex can generate new possible applications. Our high-pressure pumps and aggregates are used worldwide. The company guarantees that its industrial pumps will meet customer quality standards. Thanks to state-of-the-art production facilities, Speck-Triplex high-pressure plunger pumps and aggregates are manufactured to the highest standard.

Verkkosivusto
KUHN GMBH

Saksa

KUHN GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Liitokset, hydrauli-. Sen sijainti on Gelnhausen, Saksa.
D.W.I. SERVICE GMBH WERBUNG UND MARKETING

Saksa

D.W.I. SERVICE GMBH WERBUNG UND MARKETING, on Tukkukauppias, joka toimii toimialalla Liitokset, hydrauli-. Sen sijainti on Blankenfelde-Mahlow, Saksa.
JURIMA DICHTUNGEN GMBH

Saksa

JURIMA DICHTUNGEN GMBH, on Tukkukauppias, joka toimii toimialalla Liitokset, paineilma-. Sen sijainti on Augsburg, Saksa.