Lisää profiilini Saa useita tarjouksia Tunnistaudu

AUMA ITALIANA S.R.L.

Italia

Yhteyshenkilö
Tiedot
0 Tuotteet

Domain icon Unknown

AUMA ITALIANA S.R.L.

6 VIA DELLE ARNASCHE

20023 Cerro Maggiore - Italia

ALV-n:o
Yhteyshenkilö
Office Building Outline icon
Sivu yrityksellesi
Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.
Lisää yritykseni

europages suosittelee sinulle myös

Valikoima yrityksiä, joiden toimiala on lähellä seuraavaa:

PETER HIRT GMBH

Sveitsi

Factory icon Valmistaja/ Tuottaja

Verified by europages badge

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

PPS (PRESSURE PROFILE SYSTEMS)

Yhdistynyt Kuningaskunta

Factory icon Valmistaja/ Tuottaja

Verified by europages badge

HÖNTZSCH GMBH

Saksa

Factory icon Valmistaja/ Tuottaja

Verified by europages badge

MELUTEC METROLOGY GMBH

Saksa

Office Building Outline icon Palveluntarjoaja

Verified by europages badge

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Pyydä tarjouksia

Luo yksi pyyntö, ja saat useita tarjouksia vahvistetuilta palveluntarjoajilta.

  • Vain relevantit palveluntarjoajat
  • Noudattaa tietosuojakäytäntöä
  • 100% ilmainen