Tulokset hakusanalle

Services for filter systems - Saksa

9 Yritykset

0 Tuotteet

DSL AIR TECHNOLOGY GMBH & CO KG

Saksa

A medium-sized company of more than 25 years' standing, we have made our name nationally and internationally in the fields of air filter technology, workplace safety and environmental protection on the basis of an ecological and socially responsible company philosophy. The "door within a door" design of our electrofilter series has become an international benchmark for technically sophisticated and easy-maintenance filter systems. For years, the continuous monitoring of developments in the design and performance of modern machine tools has given rise to more and more new electrofilter series, often in collaboration with the mechanical designers, and with the form adapted to the machine tool design. This also calls for a new design of the filter equipment, primarily the ionizer and collector cells. Today, DSL Air Technology boasts the world's largest electrofilter modification in the sector.

Verkkosivusto
INDUSA GMBH

Saksa

INDUSA GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Suodatuslaitteet ja -tarvikkeet. Se on aktiivinen myös seuraavilla toimialoilla Extraction systems for work places, Aspiration systems for emulsion mist and oil mist, Extraction systems for eroding machines, sähkösuodattimet, Emulsion mist collectors, Emulsion mist filter, suodatuskerrokset, Non-woven filter materials, Air filtration systems. Sen sijainti on Neu-Anspach, Saksa.
FAUDI GMBH

Saksa

FAUDI is a globally established company in the filtration and separation technology sector and your point of contact where the smooth operation of systems is concerned. Decades of experience in planning and manufacturing filter systems for cooling lubricant processing as well as in the chemical and petrochemistry sector guarantee our customers sustainable system availability. We provide filtration solutions for a diverse range of applications. Our products and services will help you comply with legal standards, increase performance and reduce your operating costs all at the same time. Because when we at FAUDI speak of quality, it goes beyond long service lives and fault-free operation: "Total cost of ownership" (TCO) is an important benchmark in development work for our engineers. FAUDI is your competent partner from the planning and manufacturing stage right through to turnkey installation and commissioning.

Verkkosivusto
EPA GMBH

Saksa

As a specialist in the field of electronic drive technology, we see ourselves not only as a component supplier, but also as a systems provider. Starting with engineering, through consultation and support, right up to commissioning, we provide all services, including installations on turnkey contract. Our core services are: Planning your applications, designing electrical drive components, (frequency inverter, engine, gearbox, transmitter, filter, brake resistors, etc.), commissioning and parametrisation of frequency inverters, PLC programming and automation, control cabinet construction (in cooperation with our affiliated company EPS), installation of electrical components, developing and manufacturing customer-specific EMC and line filters, EMC measurements and EMC consultation, leakage current optimisation (FI protection switch for false tripping), line analyses (harmonics, line fluctuations, etc.), suppression of radio interference in plants and equipment

Verkkosivusto
FUSS-EMV ING. MAX FUSS GMBH + CO. KG

Saksa

In top form at the science park – individual EMC solutions from the WISTA Science and Technology Park in Berlin-Adlersdorf – Nothing can replace expertise. In 1986 we developed the first ferrite core filter – since then we have grown to be one of the leading providers of EMC solutions. Over 100 years of experience in developing and producing electromechanical controllers, transformers and rectifiers has led to this success. Today, our range of services incorporates the following: EMC interference suppression of electrical equipment, voltage quality filters for systems generating renewable energy, and e-mobility. The same principles apply in everything we do: We offer our customers solutions and our top priority is always to provide tailored advice. As a medium-sized service provider, our lean structure facilitates short development cycles by virtue of our in-house measurement laboratory, effective production and fast delivery to customers.

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

APROVIS

Saksa

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

Verkkosivusto
HNP MIKROSYSTEME GMBH

Saksa

precise pumps – smart solutions HNP Mikrosysteme develops, manufactures and markets pumps worldwide. These micro annular gear pumps (mzr®-pumps) are used where fast and highly precise dosage is required. Five pump series enable: - a minimum dosage volume of 0.25 µl - a flow rate range from 1 µl/h to 1152 ml/min - pressure up to 150 bar These pumps stand out for their pulseless delivery, minimal dead volume, long service life, small dimensions, highly resistant materials and ease of maintenance. Furthermore, we offer individual application advice as well as filling and dosing systems for the following areas: - mechanical and plant engineering - chemical and pharmaceutical process engineering - medical and analytical instrumentation Every metering application brings new challenges. We look forward to your inquiry and will thoroughly discuss your application as well as advise you in detail regarding pumps, systems, filters, controls, sensors and much more. HNPM is based in Schwerin (in the North of Germany). Round about 90 employees work in construction, development, quality assurance and assembly or at our technical sales team, consisting of engineers and scientists.

Verkkosivusto
HELLMICH GMBH & CO KG

Saksa

Hellmich GmbH & Co. KG was founded in April 1963 by Friedrich Hellmich and is based in Kirchlengern. From its beginnings in metal pipeline production, over the last half-century the company has developed a comprehensive product range in the dust extraction technology, flue gas cleaning, pipeline construction and plant construction sectors. Over its history, it has manufactured and installed more than 600 flue gas cleaning systems and more than 1000 dust extraction systems around the world. The company has an extensive network of international representatives and licensees. The goal the company sets itself is, and always has been, to develop effective, practical solutions to any air purification problem, tailored to each customer's individual requirements and specifications.

Verkkosivusto
DIPL.-ING. ERICH FETZER GMBH + CO KG

Saksa

DIPL.-ING. ERICH FETZER GMBH + CO KG, on Valmistaja/ Tuottaja, joka toimii toimialalla Suodatuslaitteet ja -tarvikkeet. Se on aktiivinen myös seuraavilla toimialoilla cyclone filters, Edge split filters, vacuum filters, Backflushing filters, automatic, Pressure belt filters, Vacuum belt filters, Sheet filters, centrifugal separator, nauhasuodattimet. Sen sijainti on Reutlingen, Saksa.

Löydä tarjouksia

Suodattimet

Tulokset hakusanalle

Services for filter systems - Saksa

Tulosten määrä

9 Yritykset