Tulokset hakusanalle

Laitteet

3 387 Yritykset

33 Tuotteet

Tuotesuosittelut

Turkki

Polttimet epoksijauhemaalin asennusta varten

Ranska

Ranska

Neuvontaa meriteollisuuden akkujen valinnassa

Ranska

Katso lisää tuotteita

FORM + TEST SEIDNER & CO. GMBH

Saksa

For more than 55 years, we have been developing and producing testing machines in the Upper Swabian town of Riedlingen. One of our strengths is the design and production of high-quality special test machines according to individual customer specifications. From the smallest machine with an output of just a few newtons to 10, 000 kN pressure test machines weighing over thirty tonnes, our team of experienced engineers and technicians is able to realise the most demanding designs themselves. Due to our close contact with the leading centres and universities, we are always up to date when it comes to testing technology. Our membership of the Verband Deutscher Maschinen- und Anlagenbau (VDMA), a specialist community for testing machines, guarantees you forward-looking technologies, outstanding quality and reliable service. An independent department deals with the development and adaptation of electronic assemblies on our test machines. There's a focus here on project planning and development according to customer-specific specifications. Hardware is produced by a subsidiary in Switzerland.

Verkkosivusto
INDUCTOHEAT EUROPE GMBH

Saksa

Welcome to six decades of induction expertise. Inductoheat Europe – Your contact for all matters relating to induction heating and heat treatment. As part of the global Inductotherm Group, we are technology leaders in the inductive heating sector in Europe. We develop, produce and sell induction heating systems for a wide range of industrial applications at our main plant in Reichenbach. We manufacture standard and special hardening systems as well as inverters in large bandwidths. Inductoheat Europe also operates two contract hardening facilities in Reichenbach and Darmstadt, in which our customers have their small and large batches hardened. Our induction manufacturing plant produces these application-specific wear parts in original equipment quality and, if requested, at top speed.

Verkkosivusto
GEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG

Saksa

GEMÜ is a world-leading manufacturer of valve, measurement and control systems. The independent family-owned company with a global focus has become established in key areas for more than 50 years as a result of innovative products and customer-specific solutions for controlling process media. GEMÜ is the world market leader in sterile applications for pharmacy and biotechnology. The group currently employs 900 members of staff in Germany and over 1600 around the world. Its products are manufactured at six production sites in Germany, Switzerland, China, Brazil, France and the USA. Global sales are coordinated from Germany with 27 subsidiaries. The group is active on all continents through a dense network of trading partners in more than 50 countries. GEMÜ will establish an increased presence in future markets with its international growth strategy.

Kaikki tuotteet kirjainyhdistelmällä "laitteet"

GEMÜ C50

GEMÜ C67

GEMÜ C60

Verkkosivusto Näytä kaikki tuotteet
HEINZ THUMM ÖLHYDRAULISCHE ANTRIEBE GMBH

Saksa

HEINZ THUMM ÖLHYDRAULISCHE ANTRIEBE GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Hydrauliset laitteet. Se on aktiivinen myös seuraavilla toimialoilla Oleodynaamiset laitteet ja välineet, Hydraulic components for farming machinery, Hydraulic motors, Hydraulic motors, slow-running, Rotators for construction machinery, Rotators for forestry machinery, Standard rotators, Compact rotators, Integrated rotators. Sen sijainti on Fellbach, Saksa.
GÜTTLER GMBH

Saksa

Güttler GmbH was founded in 1981 by Fritz and Hans Güttler. With its agricultural machinery, Güttler has been setting standards for more than 40 years. First with seed bed preparation and, for the past 20 years, in the field of professional green area maintenance. Our goals are to ensure soil protection, provide evaporation and erosion protection measures and avoid the development of resistance in herbicides. Working with our machines means optimum care for more and better feed from your own land, for healthier animals and thus more success in the barn. We provide machines with working widths of 1.50 m to 15.60 m. These premium products are designed to ensure durability. They have proven their worth for many years, even in large companies. The key to your agricultural success!

Verkkosivusto

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

CIC - KLAUS CZERWONKA

Saksa

As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

Verkkosivusto
SCHMID & WEZEL GMBH, WERK HILSBACH

Saksa

Development, design, manufacture and distribution of flexible shafts for: Mechanical engineering, aeroplane technology, medical technology, horticulture, automotive manufacture. Delivery exclusively of customer-specific products from individual parts to large-scale series. BIAX Flexwellen is your brand for high-performance flexible shafts for various application ranges. Custom designed and precisely manufactured in accordance with high quality standards – you will receive a durable solution exactly tailored to your requirements from us. On the basis of more than 90 years of experience, we additionally use various BIAX variants which make it possible to implement virtually any customer requirement at short notice. Benefit from pre-assembled complete solutions in which the shaft cores are already assembled with shaft couplings, protective hoses and hose couplings.

Verkkosivusto
AUGUST MÖSSNER GMBH + CO KG

Saksa

We solve our customers' sawing, cutting and testing problems using automated specialised machinery. The integration of band saws and robots takes centre stage in our work. In addition to our products, we also offer an extensive range of services relating to development, commissioning, operational support and assessments. We systematically implement the wishes and requirements of our customers in machinery and installations with unbeatable efficiency. Our areas of business are casting technology, machining aluminium, machining abrasive materials and, our specialist field, dismantling nuclear facilities. In addition, we are always ready and in a position to break new ground for our customers and make new projects a reality. Thanks to our impressive technical skills in manufacturing bespoke products and solutions, we are a flexible, fast and down-to-earth service provider.

Verkkosivusto
FUCHS UMWELTTECHNIK PRODUKTIONS- UND VERTRIEBS- GMBH

Saksa

Fuchs Umwelttechnik now has more than 35 years experience in developing, manufacturing and marketing extraction and filter units for ensuring clean air in the workplace. Fuchs Umwelttechnik sets the trend in creating well-engineered and efficient extraction and filter systems to solve problems associated with air pollution. Our extraction systems are specially developed for all means of collection and filtering of: Gaseous pollutants, dust, smoke, oil and emulsion mist, fumes, odours etc. Fuchs Umwelttechnik offers bespoke solutions: We adapt to your requirements, not the other way round. At Fuchs Umwelttechnik, you will find a system tailor-made precisely for you. All components within extraction and filter systems are compatible. Our module system provides individual, cost-effective solutions in combination with series production, tried and tested parts and maximum flexibility.

Verkkosivusto
FÖHRENBACH GMBH

Saksa

Developers and manufacturers of high-precision components, units and systems for linear and rotary movement in automation technology and precision mechanical engineering. Föhrenbach products are the solution for guiding, driving, movement, control and positioning tasks. The additional products offered alongside these solutions expand the range to provide complete customer-specific solutions up to and including special machines. The supply range includes, for example, SVAN adjusting slides, dovetail slides, roller slides and compound slides, motor-controlled precision slides with KBS, KCS and KCL ball bushing guides (with direct drive), compact PCL and PFL profile guide slides with integrated linear motor and measuring system, PFS profile guide slides with spindle drive, LDH direct drive handling modules, RT2A rotary table series (with screw drive) and RT3A series (direct drive), rotating and swivelling units, indexing heads, press axes, and linear and path control systems.

Verkkosivusto

LT ULTRA-PRECISION TECHNOLOGY GMBH

Saksa

Since our foundation in 1995, we have become one of the world’s leading companies in the field of ultra-precision technology. As well as our UP technology (machine engineering) division, via which we supply our ultra-precision machines (UP machines) amongst other things, we also offer contract production (metal optics and tools). Our machine engineering division offers you the complete range of UP processing. UP machines for milling, turning, grinding, polishing, lapping and measuring are available, while we also provide special machines – all under one roof. In our contract production division, you can have optics and tools of the highest UP quality in piece production or also in high or low volume production. This unique synergy allows us to continually make improvements to our UP machinery thanks to the ongoing feedback from our own production department. In addition, interferometers and UP bearings (linear systems and rotary tables) are also available via our UP Technology division.

Verkkosivusto
AFS AIRFILTER SYSTEME GMBH

Saksa

High power – clean air. Today, when coolant pressures, cutting speeds and processing speeds in machine tools are increasing all the time, ever more aerosols are being produced, and these aerosols are becoming finer and finer. They should not – and indeed must not – be allowed to escape into the environment or the rest of the manufacturing facility without being purified. For 20 years, AFS has been one of Germany's leading manufacturers of air purifying systems and equipment for cleaning oil and emulsion mist for the metalworking industry. We offer oil and emulsion mist separating equipment – central extraction systems for oil and emulsion mist – air intake systems with heat recovery – ventilation systems – industrial environmental protection – special designs with active carbon for purifying exhaust air containing hydrocarbons. AFS is series outfitter for numerous leading machine tool manufacturers around the world, such as DMG Mori, Starrag Group, Fanuc, Stama, Kunzmann, and many more.

Verkkosivusto

Tuotesuosittelut

Ranska

Ranska

Saksa

Etelä-Korea

Katso lisää tuotteita

ELT ENTSTAUBUNGS- UND LUFTTECHNIK GMBH

Saksa

Our aim is not only to identify each individual technical task but also to work towards comprehensive solutions while keeping cost-effectiveness, amortisation, safety and environmental sustainability in focus. The benefit for you is our speed. ELT was founded in 1996 by two engineers whose experience is based on 30 years of working in the ventilation and dust removal technology sector. Thanks to our flexibility and technical expertise, we have been able to construct installations in a variety of sizes both in Germany and abroad. Our strength lies in the cohesion of our company with close collaboration between customer consultation, detailed planning, preparation and professional installation.

Verkkosivusto
DSL AIR TECHNOLOGY GMBH & CO KG

Saksa

A medium-sized company of more than 25 years' standing, we have made our name nationally and internationally in the fields of air filter technology, workplace safety and environmental protection on the basis of an ecological and socially responsible company philosophy. The "door within a door" design of our electrofilter series has become an international benchmark for technically sophisticated and easy-maintenance filter systems. For years, the continuous monitoring of developments in the design and performance of modern machine tools has given rise to more and more new electrofilter series, often in collaboration with the mechanical designers, and with the form adapted to the machine tool design. This also calls for a new design of the filter equipment, primarily the ionizer and collector cells. Today, DSL Air Technology boasts the world's largest electrofilter modification in the sector.

Verkkosivusto
FRIEDRICH MASCHINEN- UND WERKZEUGBAU GMBH

Saksa

D. Friedrich Maschinen- und Werkzeugbau GmbH & Co. KG, or FMW, was founded in 1948 in Remshalden near Stuttgart. The family-run company develops and produces riveting machines, special-purpose machines and electrically operated presses for the automotive, fittings and electrical industries. The company's image is shaped by modern business equipment and contemporary production facilities. Its history of success is based on innovative management, highly qualified engineers and electricians and well trained technicians and specialists with many years of experience. Technical expertise, innovative strength and a good quality management system functioning in accordance with DIN ISO 9001 guarantee that Friedrich products are of consistently high quality. High-quality products, customer-specific complete solutions, expert advice and comprehensive service also make Friedrich a reliable and successful international partner.

Verkkosivusto
KOTHE DESTILLATIONSTECHNIK GMBH

Saksa

In the world of alcohol production and distillation, all roads have led to the company Kothe for over 40 years. We produce thought-out distillation systems at the highest technical level from the initial idea to the final detail – always individually adapted to the requirements of our international customers. Quality in every detail. From small private distilleries to small commercial distilleries, lockup distilleries or vodka and whisky distilleries – each of our distillation systems is customised, and demonstrates the best of what you can expect from distillery technology. All our distillation systems are manufactured to customer request after intensive consultation. We show particular consideration here for the raw materials to be processed, and also compile complete processing plans in addition to the distillation system. To this end, you also get a comprehensive range of accessories from us – from the small alcohol detection device to filling and labelling systems. We design turnkey grain or molasses distilleries as well as fruit distilleries – from tree recommendations through mashing and distilling right up to completion and storage. We are also happy to carry out a sensory analysis of your distillates. Send us samples if you're not sure whether to submit them for an award, or simply to get an independent opinion regarding quality. A team of experts looks forward to hearing from you!

Verkkosivusto
ROCHOLL GMBH

Saksa

Technical test specimens for your requirements. 40 years ago, Rocholl GmbH started to specialise in the manufacture and sale of test specimens. With a wide range of customer requests, the range grew continually: We make test specimens for virtually all materials to be tested. We like to rise to the challenge of custom-made specimens for use in testing and research institutes in particular. We employ over 25 members of staff, all of whom are selected experts in their field. This is because knowledge of materials and their properties plays an important role in the manufacture of test specimens. Together with our cooperation partners, we meet the very high requirements for materials and design in the area of test specimen manufacturing. We are among the best in Europe: The satisfaction of our customers is proof and confirmation for us. Well-known companies have placed their trust in us and benefit from our mutual cooperation and customer focus.

Verkkosivusto
ASPUR AIR SOLUTIONS

Saksa

With over 25 years of expertise in consulting and technical developments, as well as having obtained our own patents, we offer comprehensive knowledge of consulting and design for air handling equipment and systems. We have customers in virtually all production sectors, as well as in the services and retail sectors. We supply industries, such as mechanical engineering, the automotive industry and suppliers, pharmaceuticals, the chemicals industry, food producers and many more besides. We would be very pleased to have you among our customers and we look forward to hearing from you.

Verkkosivusto
ULMAN DICHTUNGSTECHNIK GMBH

Saksa

We are a complete service provider in sealing technology and have diversified into many fields such as mechanical engineering, stationary and mobile hydraulic systems, drive technology and electrical engineering, plant manufacture, the chemical industry, process engineering and the automotive sector. As a globally oriented company, we represent a partner the success of which comes down to its closeness to the customers and the market. Responsibility for the strength of the company's growth falls to the 103 employees in our group for the customer service they provide and their willingness to innovate. In the year 2016 alone, we were able to look back over 361 million sold articles. Our orientation towards long-term goals and the continuous growth of the company since it was founded spur us on and confirm the functionality of our strategic organisation and quality of or products. Our committed employees make sure that you receive quality, service, innovation and the best possible solution for every application at all three sites.

Verkkosivusto
FRIDOLIN MÜLLER

Saksa

Production of deburring brushes, cylindrical brushes, tube brushes, technical brushes, wire brushes, nylon brushes, twisted brushes, brushes for washing systems, truck wash brushes, car wash brushes. The Fridolin Müller company was founded in 1952 under the name of Tierhaarverwertung Fridolin Müller. It worked with cattle hair, some of which came from German cattle. Most of it, however, was imported from America. These hairs were processed in four working operations to create the so-called "bakers' bundles". The working operations included: Loosening the hairs using a so-called "hair-wolf", heckling them (which means combing them into one direction), "pulling" the hairs to different lengths and then binding the different lengths to make "bakers' bundles". Those bundles were then delivered to the paint brush factories. Machines were used for some of the individual working operations. From about 1969, brushes for carwashes were also produced. 1972 was the beginning of the production of technical brushes. In that year, a company that mainly made powdering systems for confectioneries was taken over. Occasionally, that company also produced technical brushes. Over the years, powdering systems were marketed less, and they focused more and more on the production and marketing of technical brushes as well as car wash brushes and rollers for cleaning machines. The range includes a wide choice of cylindrical brushes.

Verkkosivusto

PETER HUBER KÄLTEMASCHINENBAU SE

Saksa

Peter Huber Kältemaschinenbau was founded in 1968 by Peter Huber and has is still a family-owned business. We employ around 300 staff at our headquarters in Offenburg at the Tango Factory. In addition, through international branches and sales partners, we offer a comprehensive and reliable service worldwide. Some twenty years ago, we started by switching to environmentally compatible coolant. A large part of our product range now comes with natural coolants as standard – making us pioneers in the field of ecological and sustainable temperature control technology. Our company is a leader provider of high precision temperature control solutions for research and industry. Our products are used in laboratories, technical facilities and production processes around the world to ensure precise temperature control from -125 to +425 °C.

Verkkosivusto
ARCOTEC GMBH

Saksa

With almost 50 years’ experience, Arcotec GmbH enjoys success as the sole manufacturer of all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). 2019 - With over 45 years’ experience, Arcotec GmbH continues to enjoy success as the sole manufacturer all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). Over 15, 000 Arcotec pretreatment systems in use worldwide are a testimony to our consistently high quality and unique know-how in the field of surface pretreatment. 1997 - Introduction of the atmospheric plasma machine (Arcospot®), which distributes high-energy spark discharges. The introduction of the atmospheric plasma machines in particular opened up the market for materials that are difficult to treat at high feed rates. 1991 - Another physical treatment principle, “flame treatment”, was introduced. 1985 - Arcotec GmbH was founded. Pretreatment systems 1976 - Development and deployment of the world’s first plasma machine with open jet electrodes (Arcojet®) for treating plastic moulded parts; this works with electric plasma. Pretreatment systems 1975 - Production of the pretreatment machines begins using high-frequency corona. Pretreatment systems 1974 - Fritz Bloss founded an independent commercial agency.

Verkkosivusto
DÜRR NDT GMBH & CO. KG

Saksa

DÜRR NDT offers comprehensive digitisation solutions for the nondestructive testing (NDT) industry: Networked, digital radiography systems combined with innovative software. These include high-resolution image plate scanners (CR) and flat panel detectors (DDAs), software for image capture and analysis, standards-compliant digital archiving tools and the integrated NDT workflow management and reporting platform DRIVE NDT. The innovative systems from DÜRR NDT are always at the cutting edge of technology and continue to set new standards in terms of resolution, user-friendliness and durability. We are still the only CR manufacturer with a BAM-certified 30 μm basic local resolution worldwide! In almost 20 years, DÜRR NDT's X-ray inspection systems have established themselves in a variety of industrial applications, both mobile and stationary, and are used in more than 80 countries.

Verkkosivusto
WEGOMA GMBH

Saksa

Since 1970, the WEGOMA® brand has stood for reliable, precise and innovative machines and power tools for woodworking and window construction. As a second-generation family business, we feel it is our duty to provide our customers not only with high-quality products, but also with the best possible advice and outstanding service . From the planning stage to the provision of replacement parts, we accompany our customers in every phase of the value-creation process. We want to facilitate their long-term success – only then can we too deal with the competition in the future. WEGOMA stands for precision and innovation in the fields of woodworking and window construction technology. WEGOMA GmbH develops and manufactures special solutions and standard machines for woodworking.

Verkkosivusto
YSTRAL GMBH MASCHINENBAU + PROCESSTECHNIK

Saksa

ystral is a fast growing, owner-managed company in the mechanical and plant engineering industry. We focus on the construction of individualised mixing machines, dispersing machines and powder wetting machines as well as special mixing plants, dispersing plants and powder wetting plants for liquid mechanical process engineering. In addition, our process technologies also include emulsifying and homogenizing. Our headquarter is located in Ballrechten-Dottingen, Germany. We are a medium-sized company with over 270 employees and subsidiaries in China, India and Singapore as well as numerous representatives worldwide. We constantly develop the know-how of our employees as well as our technologies in line with your requirements and thus meet our own high standards: ystral - 110% MIXING SOLUTIONS. Whether for the production of chemical products, the food industry, cosmetics, pharmaceuticals or coatings and inks. With ystral machines and plants you minimize your process times, reduce the use of raw materials and often also improve the quality of your products. With our extensive knowledge and many years of experience in process and application technology, we develop specific, customer-oriented solutions for you across all industries. Together with you, we develop implementations for your individual applications that provide you with immediately achievable and quantifiable added value. We will accompany you through all process steps with our drive and full commitment.

Verkkosivusto
HAINBUCH GMBH SPANNENDE TECHNIK

Saksa

We develop and produce highly precise clamping devices for clamping workpieces when milling, turning and grinding on machine tools.

Verkkosivusto
A.B.S. SILO- UND FÖRDERANLAGEN GMBH

Saksa

A.B.S. SILO- UND FÖRDERANLAGEN GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Siilot, maatila-. Se on aktiivinen myös seuraavilla toimialoilla Maatalousjärjestelmät ja -laitteet, Silos, Sack silos, Textile silos, Flexible silos, Siilojen rakentaminen, Fabric silos, Fabric tanks, Silo systems. Sen sijainti on Osterburken, Saksa.
ERNST REINER GMBH & CO. KG

Saksa

ERNST REINER GMBH & CO. KG, on Valmistaja/ Tuottaja, joka toimii toimialalla Leimasimet - koneet ja laitteet. Sen sijainti on Furtwangen, Saksa.
HO-MA GMBH

Saksa

HO-MA GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Kemian- ja lääketeollisuus - koneet ja laitteet. Se on aktiivinen myös seuraavilla toimialoilla Systems for pharmaceuticals, medicine and cosmetics, Transport systems, Transport and feeding systems, Feeder trolleys, Sorting and feeding systems, Feeding devices, Slide feeder, Machinery and system manufacturing, Automaatio. Sen sijainti on Ilshofen, Saksa.
HÖNTZSCH GMBH

Saksa

HÖNTZSCH GMBH, on Valmistaja/ Tuottaja, joka toimii toimialalla Mittaus- ja säätölaitteet ja -välineet - teho ja virtaus. Se on aktiivinen myös seuraavilla toimialoilla Räjähdyksenkesto - laitteet, Mittaus- ja säätölaitteet ja -instrumentit - paineen, Air flow meter, Calibration service, kalibrointi, Development of flow meters, virtausmittari, Sensors for explosion protection areas, kennot. Sen sijainti on Waiblingen, Saksa.