Tulokset hakusanalle

Työkalut - Saksa

731 Yritykset

0 Tuotteet

MENN BAUSTOFFE GMBH

Saksa

MENN BAUSTOFFE GMBH, on Tukkukauppias, joka toimii toimialalla Rakennusmateriaalit. Se on aktiivinen myös seuraavilla toimialoilla rakennustarvikkeet, työkalu, fajanssilaatat, ikkunat. Sen sijainti on Berlin, Saksa.
IMPEX ONE UG

Saksa

IMPEX ONE UG, on Tukkukauppias, joka toimii toimialalla Työkalut - puutarha. Se on aktiivinen myös seuraavilla toimialoilla työkalu, puutarhanhoitotarvikkeet. Sen sijainti on Rutesheim, Saksa.
ANYBRAND GMBH

Saksa

ANYBRAND GMBH, on Tukkukauppias, joka toimii toimialalla Kuulakärkikynät. Se on aktiivinen myös seuraavilla toimialoilla Mainoslahjat, mainostarvikkeet, työkalu, kiilat, Mainoslahjat. Sen sijainti on Dautpehtal, Saksa.
GEPCO - WERKZEUG FÜR WERKSTATT UND HAUSHALT

Saksa

GEPCO - WERKZEUG FÜR WERKSTATT UND HAUSHALT, on Vähittäiskauppias, joka toimii toimialalla Työkalut - puutarha. Se on aktiivinen myös seuraavilla toimialoilla työkalu. Sen sijainti on Hamburg, Saksa.
WERKZEUG-SIGEL.DE

Saksa

WERKZEUG-SIGEL.DE, on Vähittäiskauppias, joka toimii toimialalla Käsityökalut, ei-sähkökäyttöiset. Se on aktiivinen myös seuraavilla toimialoilla työkalu, sähkötyökalut, käsityökalut. Sen sijainti on Tettnang, Saksa.

Sivu yrityksellesi

Näetkö sinä tämän? Niin näkevät myös potentiaaliset asiakkaasi. Liity joukkoomme saadaksesi näkyvyyttä europagesissa.

Lisää yritykseni

CROWDSHOP GMBH

Saksa

CROWDSHOP GMBH, on Tukkukauppias, joka toimii toimialalla Käsityökalut, ei-sähkökäyttöiset. Se on aktiivinen myös seuraavilla toimialoilla työkalu, voiteluaineet. Sen sijainti on Regensburg, Saksa.
WEV SCHMALKALDEN MATTHIAS HERRMANN

Saksa

WEV SCHMALKALDEN MATTHIAS HERRMANN, on Valmistaja/ Tuottaja, joka toimii toimialalla Tee-se-itse-käsityökalut, ei-sähkökäyttöiset. Se on aktiivinen myös seuraavilla toimialoilla työkalu, käsityökalut. Sen sijainti on Schmalkalden, Saksa.
MSL-VERTRIEB FAHRZEUGEINRICHTUNGEN UND WERKZEUGE

Saksa

MSL-VERTRIEB FAHRZEUGEINRICHTUNGEN UND WERKZEUGE, on Palveluntarjoaja, joka toimii toimialalla Ajoneuvot - huolto. Se on aktiivinen myös seuraavilla toimialoilla työkalu. Sen sijainti on Münchberg, Saksa.
WERKZEUGKOFFERTEST.COM

Saksa

WERKZEUGKOFFERTEST.COM, on Palveluntarjoaja, joka toimii toimialalla Ainetta rikkomaton koestus. Se on aktiivinen myös seuraavilla toimialoilla työkalu, langattomat työkalut. Sen sijainti on Achern, Saksa.
DEWALT WERKZEUGLADEN NIEDERROTH

Saksa

DEWALT WERKZEUGLADEN NIEDERROTH, on Tukkukauppias, joka toimii toimialalla Rakennuskoneet. Se on aktiivinen myös seuraavilla toimialoilla työkalu. Sen sijainti on Niederroth, Saksa.

WERKZEUGE-24.DE

Saksa

WERKZEUGE-24.DE, on Jakelija, joka toimii toimialalla Ajoneuvojen korjaus - kannettavat sähkötyökalut. Se on aktiivinen myös seuraavilla toimialoilla työkalu. Sen sijainti on Heusenstamm, Saksa.
SITEMA GMBH & CO KG

Saksa

SITEMA is the only company in the world specialising exclusively in the development and production of clamping devices and linear brakes on round rods. The consequence of that specialisation: SITEMA is an internationally respected partner to machinery manufacturers. We specialise in securing, clamping and fixing loads in axial motion. It is a field in which we have been a leading brand name for many years, particularly with our SITEMA clamping heads. Alongside our broad product portfolio, we offer unique consulting and solution-delivering expertise to meet any challenge. SITEMA develops and produces hydraulically, pneumatically, mechanically and electrically operated clamping units for a many different applications.

Verkkosivusto

EWS WEIGELE GMBH & CO. KG

Saksa

The foundation of EWS dates back to 1960. Our current core competencies are in the area of tool systems for CNC turning machines (static and power-driven tools), expanding to tool turrets and revolver support systems with EWS Korea. The modern profile of the EWS Group is characterised by the individual talents of the more than 300 people that work for the Group. EWS products are "made in Germany". Our specialist expertise is demonstrated by our systems partnerships with DMG-Mori Seiki (Trifix and MSQP), INDEX (W interlocking and V strip), Sandvik (EWS Capto), Iscar and Arno (tool carrier systems). With our EWS Varia quick-change system (modular system, often incorrectly designated as Vario), our company is setting new benchmarks in optimising tool setup times. This system was awarded the Innovation Award from the state of Baden-Württemberg.

Verkkosivusto
BORNEMANN GMBH

Saksa

Bornemann GmbH is an owner-managed medium-sized company operating in the marking and special tools industry. Our die tools and specialist milling and erosion technical products are used in a wide range of sectors, such as the tools industry, the car industry, the chemical and pharmaceutical industry and in mechanical engineering. With our additional expertise in the service sector of laser marking and laser inscription, you benefit from a comprehensive, varied range of services. You can rely on us and our 50-plus years of experience, innovation and quality, our highly trained specialists and our machine park, which is always kept at the cutting edge. Bornemann marking technology stands for the very finest technical equipment for engraving, lasering, milling, eroding and sign-making.

Verkkosivusto
WERNER LANGER GMBH & CO. KG

Saksa

Werner Langer, metal & plastic processing: Over 90 employees, more than 50 years of industry experience, recognised as a high-tech company – this is our profile. Certification in accordance with DIN EN ISO 9001: 2000. We have proven ourselves as a supplier to sectors such as model making, foundry products, automotive, construction industry, electrical and the household goods industry. As a manufacturer of high quality plastic components, we can supply both plastic components and complete assemblies.

Verkkosivusto
WALTER SCHNEIDER GMBH

Saksa

Our family-run business was founded in 1954 and has a long tradition in successfully developing and producing extruded parts. Thanks to the use of state-of-the-art technology, we are able to offer cost-effective cold formed parts of premium quality and optimum strength. Our work is distinguished by our high level of production expertise, innovative developments and proactive, close partnerships with mostly long-standing customers. Our customers' trust is based on impeccable quality, reliability and intensive, solution-oriented advice. Customer satisfaction, together with the trust-based cooperation of our highly qualified experts, is the guarantee for the long-term success of our business. We machine aluminium, copper, brass, stainless steel and various steel alloys, as well as pure iron and special materials made from iron-nickel compounds such as Vacodil, Vacon and Permenorm.

Verkkosivusto
WESPA METALLSÄGENFABRIK SIMONDS INDUSTRIES GMBH

Saksa

WESPA is one of the leading manufacturers of sawing tools in the world. At their German headquarters in Melsungen, over 100 employees manufacture an unbeatably diverse product range which meets requirements from a wide range of sectors. WESPA products are optimally adapted to our industrial customers' requirements and enjoy the trust of representatives, dealers and industrial customers all over the world. As a full service provider, we deliver custom-made solutions which significantly improve our customers' edge over the competition. Reputable global players from industries including automotive, aerospace, steel and mechanical engineering rely on WESPA sawing tools. By choosing our products, customers express their trust in us; trust which, as you can see, pays off in no time at all.

Verkkosivusto
BEKO TECHNOLOGIES GMBH

Saksa

With an extensive program BEKO TECHNOLOGIES stands for compressed air technology "at its best". For more than three decades, BEKO TECHNOLOGIES has developed, manufactured and sold high-quality, reliable and efficient components and systems for compressed air processing and condensate technology. Now, BEKO TECHNOLOGIES offers a complete program for all tasks related to the processing of compressed air. Expert advice and a qualified service are a trademark of the independent and family-owned company.

Verkkosivusto
BARTSCH GMBH & CO. KG

Saksa

Metalworking and processing industry. Stainless steel trade, punching tools, systems engineering for plastic plants, mechanical engineering, rubber industry, standard components, erosion operations, metal compressing, die stamping for 15 different tool steel grades. Cold and hot-forming steels. Stock: More than 1, 000, 000 units. More than 10, 000 different dimensions of processed bars and plates in 15 different tool steel grades, cold and hot-forming steels. Manufacturer of precision flat steel and pre-prepared tool steels in the materials: 1.2842, 1.2510, 1.2379, 1.1730, 1.2312, 1.2343, 1.2083, 1.2085, 1.2162, 1.2210, 1.2990, 1.4112, ST52-3, HSS

Verkkosivusto
ENERGIETECHNIK ESSEN GMBH

Saksa

Energietechnik Essen GmbH – a member of the Georgsmarienhütte Group – bases its capabilities and skills on continuous research and development as well as on experience reaching back to 1811. The Energietechnik Essen GmbH develops, produces and supplies safety-relevant high-tech products, mainly for manufacturers of power generation machinery. When the first turbo-generator was built at the start of the 20th century, the Essen-based company supplied the retaining rings. Retaining rings are placed on the ends of the rotors to fix the copper coil against the centrifugal forces created by the high rotational speeds. The oldest documents in the company's archive relating to non-magnetisable retaining rings date back to 1901. Energietechnik Essen GmbH uses two remelting units, one electroslag remelting unit and one pressurised electroslag remelting unit, to produce the materials for retaining rings.

Verkkosivusto

HAGENKÖTTER GMBH & CO.

Saksa

Space and wear parts for blasting machines. We are a leading provider of blasting machine spare parts made of highly wear-resistant cast stainless steel and hardened tool steel. In addition to direct spare parts for blast wheel turbines, our range of goods includes virtually all wear parts that are needed in blasting machines. Blast hangers made from manganese steel and other load suspension equipment for goods to be blasted are subject to extreme wear due to the continuous impact of the abrasives, which sometimes restricts their service life to just a few weeks or months. It is therefore obvious that these products must be made from highly wear-resistant manganese steel. Manganese steel blast hangers have a service life up to 20 times longer than hangers made of traditional steel. This enables much more efficient resource planning.

Verkkosivusto
EDEL WERKZEUGMASCHINEN GMBH

Saksa

We are a German manufacturer of machining centres, for five-axis milling and turning milling processing of steel, aluminium, carbon fibre/GRP and Inconel for the following industries: – Tool and mould construction – arms industry – aerospace – automotive – general mechanical engineering. Thanks to decades of experience in the investment goods industry and a variety of industrial sectors, EDEL Werkzeugmaschinen GmbH can offer tailored and customer-focused solutions. The expansion of our product portfolio has been consistent and market-oriented since our foundation. In this way, we always follow our goal to have all of our machines with market- and sector-typical attributes that our customers know, appreciate and expect.

Verkkosivusto
CARBO-WELD SCHWEISSMATERIALIEN GMBH

Saksa

CARBO-WELD has been developing and producing high-quality welding additives since 1977. Our range includes rod electrodes, cored wires and solid wires: Cast iron | Hard facings | Tool steels | Nickel-based alloys | Cobalt-based alloys | High-alloy steels | Wear protection | Tungsten carbide additives. Our strengths lie in our expertise and flexibility – for our customers, this means: Individual solutions, direct communication, fast delivery times and competitive prices. We would be happy to discuss how we can meet your needs – please contact us directly. We are looking forward to seeing you! Carsten van Sambeck – Director +49 (0) 2161 56483 14 or c.sambeck@carboweld.de. Ulrike Schmitz – Head of Customer Relations. +49 (0) 2161 56483 21 or schmitz@carboweld.de. Wolfgang Bursy – Technical Director +49 (0) 2161 56483 15 or bursy@carboweld.de.

Verkkosivusto
BASEDO STEEL GMBH

Saksa

Four reasons to choose BASEDO STEEL. 1) Expertise: We are familiar with the specific situation faced by steel processing companies. No matter how high your requirements, or how different your materials and measurements are – we will take care of it. Exotic materials in particular are no problem for us either. 2) Service: We have numerous materials in stock at our modern warehouse in Düsseldorf, Germany. Our high-performance automated bandsaws can be used to saw steel for you at any fixed length you desire. 3) Network: Even if we do not have a material on site, we can still draw on a large international network of distributors, manufacturers, smiths and machining companies to ensure that your request does not fall by the wayside. 4) Logistics: Whether by courier service, shipping company, sea or air, we know the best way to get a specific cargo to its destination – quickly, reliably and all for a good price.

Verkkosivusto
FRITZ ROBERING GMBH & CO KG

Saksa

For decades, the name of Robering has been synonymous with profiles that stand out for their exceptional quality. Thanks to almost 60 years of experience in the field of profiles, we are not only able to provide this high standard, but are also in a position to use our expertise and innovation to realise new ideas for profiles. We no longer stock window transoms with white lips and black adhesive strip as standard. These combinations are manufactured as required in a special production process with corresponding delivery times. Due to the fact that the profile systems tend to use the colour RAL 9016 Traffic white, the colours RAL 9010 Pure white and RAL 9003 Signal white have become special colours that we no longer stock on site. However, we can of course still produce these colours according to customers' wishes. We produce our standard profiles using only newly produced hard and soft PVC materials (we do not use recycling-grade materials).

Verkkosivusto
KETTENTECHNIK ROEDER GMBH

Saksa

The Roeder family has been synonymous with roller chains for many years. Today the Kettentechnik Roeder name stands for products that turn ideas into reality. This requires modern manufacturing technology. However, this alone is not enough to substantiate our quality and delivery reliability. That calls for experience, expertise, a sense of responsibility and highly motivated staff. Our suppliers, who include all reputable German and international chain manufacturers, form the basis for our quality. Our open dealings with customers and suppliers also help to make our company unique. Not only can you find all our company information on our website, you can also visit us. Either virtually on this website or in person. You will always be most welcome.

Verkkosivusto
MOVOMECH INTERNATIONAL GMBH

Saksa

Beyond the realisation of complete handling systems, we also offer you services – no matter who the manufacturer is – which support you in solving problems in the area of ergonomic workplace design and efficient material handling. Project services: Workplace analyses, workplace evaluations. Creation of layouts and process simulations. Creation of pneumatic and electric control systems. Project management with deadline monitoring. 2D and 3D equipment design in CATIA V5, Inventor, Microstation, etc. Services offered: Installation, maintenance and commissioning of handling systems and special systems. 24-hour service within Germany. Carrying out training programmes with your operating and maintenance personnel. Launch support during the production launch. Optimisation of material flows in your production incl. adaptation and conversion work. TÜV acceptance inspections and UVV expert inspection according to the legal guidelines.

Verkkosivusto
WILHELM-PLASTIC GMBH & CO KG

Saksa

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Verkkosivusto
ING. ERICH GEISS GMBH & CO KG

Saksa

The company was founded as a trading company for armature winding products for the repair of electric motors in today's head office in 1945. Production of motor terminal boards, cell connectors, clamps, cable lugs, slip ring elements, carbon brushes, brush studs, terminal insulators, retainer insulators, stud terminals. Since that time, we have designed and built over 250 dies. With these dies, we produce approx. 40, 000 motor terminal boards for our international customers every workday. Since we began producing slip ring elements, we have been able to offer our customers more than 700 different element types and also produce slip rings based on old drawings from leading manufacturers.

Verkkosivusto
R+S AUTOMOTIVE GMBH

Saksa

65 years of experience: Machinery and tools for the automotive industry. Today, R+S Technik is among the market leading manufacturers of tools and machines for the production of interior and exterior parts for the automotive industry. We develop flexible and individual solutions that enable our globally-active partners to produce high-quality interior and exterior parts for cars, vans and lorries.

Verkkosivusto